Brace Rods Set

This Brace Rods Kit, also known as “Right and Left” set, is essential for hood work, especially for hail dents. Contains the following tools:

Brace Rod (CP0D) 20cm x 3mm – Right

Brace Rod (CP1D) 25cm x 4mm – Right

Brace Rod (CP2D) 29cm x 5mm – Right

Brace Rod (CP3D) 40cm x 5mm – Right

Brace Rod (CP4D) 49cm x 7mm – Right

Brace Rod (CP5D) 65cm x 8mm – Right

Brace Rod (CP0E) 20cm x 3mm – Left

Brace Rod (CP1E) 25cm x 4mm – Left

Brace Rod (CP2E) 29cm x 5mm – Left

Brace Rod (CP3E) 40cm x 5mm – Left

Brace Rod (CP4E) 49cm x 7mm – Left

Brace Rod (CP5E) 65cm x 8mm – Left

Specification

This Brace Rods Set, also known as “Right and Left” kit, is essential for hood work, especially for hail dents. Contains the following tools:

Brace Rod (CP1D) 20cm x 4mm – Right

Brace Rod (CP2D) 28cm x 5mm – Right

Brace Rod (CP3D) 35cm x 5mm – Right

Brace Rod (CP4D) 45cm x 7mm – Right

Brace Rod (CP5D) 55cm x 8mm – Right

Brace Rod (CP1E) 20cm x 4mm – Left

Brace Rod (CP2E) 28cm x 5mm – Left

Brace Rod (CP3E) 35cm x 5mm – Left

Brace Rod (CP4E) 45cm x 7mm – Left

Brace Rod (CP5E) 55cm x 8mm – Left

Specification

1 – Brace Rod (CP1D) 25cm x 4mm – Right

1 – Brace Rod (CP1E) 25cm x 4mm – Left

This Brace Rod is made of spring steel, high mechanical strength, and surface treatment that prevents it to get rusty.

Side: Right

Length: 25cm

Base Gauge: 4mm

Side: Left

Length: 25cm

Base Gauge: 4mm

Specification

Set 4 Brace Swords – Right & Left (27cm) and (55cm)

Shaved tools are excellent options to work behind narrow structures in the car’s roof or hood. Its flag is larger than the ones from whale tails, so it’s easier to work in larger spaces too. Besides, the perpendicular position of the handle over the tip allows the technician to work with the tool very close to the metal sheet with less chance of hurting his hands and with lots of angles to pull, similar to the whale tails.

As this tool has a lateral handle, you will need both right and left tools.

1 Brace Sword – Right (27cm)

1 Brace Sword – Left (27cm)

1 Brace Sword – Right (55cm)

1 Brace Sword – Left (55cm)

Specification

1 – Brace Rod (CP0D) 20cm x 3mm – Right

1 – Brace Rod (CP0E) 20cm x 3mm – Left

This Brace Rod is made of spring steel, high mechanical strength, and surface treatment that prevents it to get rusty.

Side: Right

Length: 20cm

Base Gauge: 3mm

Side: Left

Length: 20cm

Base Gauge: 3mm

Specification

Special sword-type rod made of the same material as the “tails”, but with the tip at 45º sharp. Its shape is boring, from end to end, which allows work on narrow platters.

It can be used on the door, as well as on ceilings, hoods, and also on rear doors of sedan type cars.

The kit is composed by:

BRACE SWORD SHARP TIP (EPS1) 30CM

BRACE SWORD SHARP TIP (EPS2) 60CM

BRACE SWORD SHARP TIP (EPS3) 90CM

BRACE SWORD SHARP TIP (EPS4) 120CM

Specification

Special sword-type rod made of the same material as the “tails”, but with the tip at 45º sharp. Its shape is boring, from end to end, which allows work on narrow platters.

It can be used on the door, as well as on ceilings, hoods, and also on rear doors of sedan type cars.

The kit is composed by:

BRACE SWORD SHARP TIP (EPS1) 30CM

BRACE SWORD SHARP TIP (EPS2) 60CM

BRACE SWORD SHARP TIP (EPS3) 90CM

Specification

Set 2 Brace Swords – Right & Left (55cm)

1 Brace Sword – Right (55cm)

1 Brace Sword – Left (55cm)

Shaved tools are excellent options to work behind narrow structures in the car’s roof or hood. Its flag is larger than the ones from whale tails, so it’s easier to work in larger spaces too. Besides, the perpendicular position of the handle over the tip allows the technician to work with the tool very close to the metal sheet with less chance of hurting his hands and with lots of angles to pull, similar to the whale tails.
As this tool has a lateral handle, you will need both right and left tools.

Specification

Set 2 Brace Swords – Right & Left (27cm)

Shaved tools are excellent options to work behind narrow structures in the car’s roof or hood. Its flag is larger than the ones from whale tails, so it’s easier to work in larger spaces too. Besides, the perpendicular position of the handle over the tip allows the technician to work with the tool very close to the metal sheet with less chance of hurting his hands and with lots of angles to pull, similar to the whale tails.

As this tool has a lateral handle, you will need both right and left tools.

1 Brace Sword – Right (27cm)

1 Brace Sword – Left (27cm)

Specification

This Brace Rods Sharp tip Set, also known as “Right and Left” set, is essential for hood work, especially for hail dents.

The sharp tip, in addition to providing more precision, was designed to work in dents in aluminum hoods.

Contains the following tools:

Brace Rod Sharp tip (CPS3D) 40cm x 5mm – Right

Brace Rod Sharp tip (CPS4D) 49cm x 7mm – Right

Brace Rod Sharp tip (CPS5D) 65cm x 8mm – Right

Brace Rod Sharp tip (CPS3E) 40cm x 5mm – Left

Brace Rod Sharp tip (CPS4E) 49cm x 7mm – Left

Brace Rod Sharp tip (CPS5E) 65cm x 8mm – Left

Specification